Flexible LED sheets provide cuttable, broad-area 24V backlighting for event production in event production, exhibit fabrication, and experiential marketing. Choose tunable-white CCT or five-channel RGBCCT sheets. Each sheet is sold individually with adhesive backing and connection hardware. Power supplies and controllers are sold separately.
Use the sheets behind translucent graphics, sign faces, scenic panels, props, displays, and lightboxes. Both options are IP20 and intended for dry indoor use.
Choose a Flexible LED Sheet
CCT Tunable-White LED Sheet
Adjustable white light from warm to cool for builds that need tunable white rather than color effects.
- 24V DC; 36W per sheet
- 576 SMD2835 LEDs; CRI greater than 90
- 24 × 12 in (610 × 305 mm)
- 2700K–6500K tunable white
- Cuttable at the designated cut points
- IP20; non-waterproof, indoor use
RGBCCT Flexible LED Sheet
Five-channel RGB plus tunable white for builds that need both colored effects and adjustable white light.
- 24V DC; 14W per channel × 5 channels (70W maximum at full output across all channels)
- 1,000 SMD2835 LEDs total: 200 LEDs per channel × 5 channels; CRI greater than 90
- 24 × 12 in (610 × 305 mm); double FPC
- RGBCCT, with tunable white from 2700K to 6500K
- 1095 lumens
- Cuttable on a 1.2 × 1.2 in (30.5 × 30.5 mm) grid
- IP20; non-waterproof, indoor use
What Is Included
Each sheet is supplied individually with adhesive backing, two connection pieces, one connecting wire, eight screws, eight screw shims, and eight anti-collision silicone pieces. Power supply and controller are sold separately.
Power and Controller Planning
Size the 24V power supply for the number of sheets and the channels used in the project. The CCT sheet draws 36W per sheet. The RGBCCT sheet is rated at 14W per channel across five channels, up to 70W when all channels run at full output. CCT and RGBCCT controllers can be matched to the corresponding sheet type when the power supply and controller are rated for the project’s total load.
Include your sheet quantity, whether you need CCT or RGBCCT, and the intended output when you inquire. If you already have a controller, include its model so we can check the setup.
Request Sheets for Your Build
Use the inquiry form to request individual sheets and optional power supplies or controllers. Include the quantity, sheet type, intended use, project deadline, and delivery ZIP code. CAD, a SketchUp file, rendering, or project tracker link can help us review how the sheets fit your build.
Planning a Cuttable LED Sheet Layout
Measure the illuminated area and map the sheet layout before applying the adhesive backing. Both CCT and RGBCCT sheets can be cut, but cuts must follow the product’s designated cut marks or cut grid. The RGBCCT model has a 1.2 × 1.2 in (30.5 × 30.5 mm) cut interval. Keep the cut plan, connector positions, and wire routing accessible for assembly and service. Do not assume a cut piece can be reconnected without the correct connector and electrical planning.
Choosing CCT or RGBCCT for an Event Build
Choose CCT when the build needs adjustable white light from 2700K to 6500K, such as illuminating a graphic or display where color effects are not required. Choose RGBCCT when the same installation needs RGB color effects as well as tunable white. The RGBCCT sheet uses five channels, so plan the controller, wiring, and power supply around the channels you expect to operate together and the total number of sheets.
These are flexible LED sheets for integration into a larger build, not finished standalone fixtures. The adhesive backing helps position a sheet on a suitable, clean surface, while the included connection pieces and wire support sheet connections. Confirm the mounting surface, access for connections, and heat management with your fabrication plan. The sheets are IP20 and non-waterproof, so use them in dry indoor applications rather than exposed outdoor or wet locations.
For a useful quote, send the lit area dimensions, the number of sheets you expect to use, the CCT or RGBCCT type, your control approach, and the project deadline. If the final sheet count is not known, share a sketch, CAD drawing, rendering, or tracker link. We can review the layout and help identify the sheet type and power requirements for the planned installation.
